Should Model Volume Include Supports?

Use the slicer's supported volume when available and set Supports Allowance to zero. If the slicer only reports the model, use the allowance as a planning estimate.

Why Adjust For Failure Risk?

A shop that never prices expected failures into repeat work under-recovers resin and machine time. The calculator divides planned material by the expected success rate rather than simply adding the same percentage.

Resin Print Cost Calculator

Quote resin prints from slicer volume, supports, vat waste, failure risk, machine time, labor, consumables and markup.

Print Job

Use the volume and duration from the final supported slicer file.

Resin ProfileModel Volume Per PartmLPart QuantityResin Densityg/mLSupports Allowance%Vat / Cleaning Waste%Failed Print Risk%

Cost Model

Separate material, machine, labor and shop consumables.

Bottle VolumemLBottle Price$Batch Print TimehrPrinter PowerWElectricity Rate$/kWhMachine Rate$/hrHands-On LaborhrLabor Rate$/hrGloves / IPA / FEP$Quote Markup%

Quote Summary

Transparent batch and per-part pricing.

Recommended Customer Quote

$44.97

$11.24 per finished part

Risk-Adjusted Resin: 225.37 mL
Bottle Used: 22.54%
Resin Cost: $5.63
Electricity: $0.09
Machine Time: $9.75
Labor: $18.00
Internal Cost: $35.98

Planning estimate. Resin trapped in hollow models, drain holes, orientation, exposure calibration, post-curing, taxes and shipping can change the real job cost.

Loading Tool…

What Is the Resin Print Cost Calculator?

The Resin Print Cost Calculator turns a supported slicer's volume and batch time into a transparent job quote. Material volume is adjusted for supports, vat or cleaning waste and expected failed-print risk before resin, electricity, machine, labor and shop consumable costs are totaled.

How It Works

Enter model volume per part and quantity, choose or customize a resin profile, then add the actual batch time and shop rates. The result separates internal cost, customer quote and price per finished part.

When to Use It

Use it when estimating SLA, MSLA or DLP print jobs for a makerspace, service bureau, small shop or hobby commission.

Frequently Asked Questions

Should Model Volume Include Supports?: Use the slicer's supported volume when available and set Supports Allowance to zero. If the slicer only reports the model, use the allowance as a planning estimate.
Why Adjust For Failure Risk?: A shop that never prices expected failures into repeat work under-recovers resin and machine time. The calculator divides planned material by the expected success rate rather than simply adding the same percentage.

Found an issue? Send Feedback. See our data sources and update policy for tools that depend on changing information.